Thermoplan Coffee Machine Cleaning Procedure

Based on the search results, here is a comprehensive and detailed procedure for cleaning a Thermoplan Black&White3 coffee machine. It is important to remember that this guide serves as a general overview, and you should always consult the specific operating manual provided with your machine. Different models may have slight variations in their cleaning processes, so following the manufacturer’s instructions is essential for optimal maintenance and performance.

Daily Cleaning Procedure

1. Start the Cleaning Cycle: To initiate the cleaning cycle, press and hold the button located at the bottom right of the machine’s screen for approximately five seconds. You will notice two icons appearing on the display; at this point, select the icon on the right-hand side to enter the cleaning mode. This step activates the machine’s automated cleaning functions, preparing it for the subsequent cleaning tasks.
2. Clean the Grounds Drawer: Once the cleaning mode is activated, the machine will prompt you to remove the grounds drawer. Carefully take out the drawer, then empty any used coffee grounds into a suitable waste container. Rinse the drawer thoroughly with warm water to remove residual coffee particles. At the end of the day, it is advisable to wash the grounds drawer using mild soapy water to ensure it is fully clean. After washing, allow the drawer to air-dry completely before reinserting it into the machine to prevent any moisture-related issues.

3. 

4. Insert Cleaning Tablets: The next step involves the use of cleaning tablets to ensure the internal components of the machine are properly maintained. Begin by removing the tablet holder, which is done by turning it counterclockwise. Place two cleaning tablets inside the holder, ensuring they are positioned correctly. After inserting the tablets, reinsert the holder into the machine by turning it clockwise until it is securely in place. The machine will then commence the cleaning process, which typically takes around ten minutes to complete. During this time, the cleaning tablets work to dissolve and remove coffee oils and residues from inside the machine.

1. Clean the Coffee Outlet: After the automated cleaning cycle has finished, the machine will prompt you to clean the coffee outlet manually. To do this, locate the screw underneath the outlet head and carefully unscrew it to allow the outlet head to be pulled down. Use a brush or a pipe cleaner along with hot water to thoroughly clean the coffee outlet, removing any coffee residue or blockages. Once cleaned, securely reattach the outlet head by screwing it back in place. This step helps maintain the flow of coffee and prevents any build-up that could affect the machine’s performance.
2. Clean the Steam Wand: If your Thermoplan Black&White3 model includes a steam wand, it is essential to clean it after every use to maintain hygiene and functionality. Begin by wiping the steam wand with a damp towel to remove any milk residue on the exterior. Then, dispense a small amount of steam through the wand to clear any milk trapped inside. Exercise caution during this process, as the steam wand will be hot and could cause burns if handled improperly. Regular cleaning of the steam wand ensures that it remains free from blockages and continues to operate efficiently.